mkt. #8910015 - rev b 7/10 page 1 of 2 printed in usa SH-120 series wall mount weather proof select-a-strobe/horn ? potter electric signal co., llc ? st. louis, mo ? cust service: 866-240-1870 ? tech support:866-956-1211? canada 888-882-1833 ? www.pottersignal.com ? ul listed ? 120 vac operation ? outdoor and indoor ? 6 sound output settings ? pre-wire back plate ? universal back plate mounting (single gang, double gang, octagon, or 4 square) ? single screw mounting ? low current draw ? bbx-5 weather proof backbox included the SH-120 series select-a-strobe/horn ? is designed to provide audible and/or visual signals for fire and burglar alarm protection systems and notification signals for the purpose of life safety and protection. the SH-120 are operable with a 120 vac system between 96 vac and 132 vac. they can be interfaced with pull stations, installation stock number model number description color 4710030 SH-120r selectable strobe/horn/chime red 4710031 SH-120w selectable strobe/horn/chime white 4270048 bbx-5 back box (included) red 4270049 white 1500001 bbk-1 bell back box red ordering information flow switches, and sprinkler systems for residential, commercial and industrial applications. the sh series combines a selective three horn tone and provides a continuous tone or temporal pattern (code 3) when constant voltage is applied. this series is available with a red or white housing and a clear lens. note : installation must comply in accordance with applicable standards. optional bbk-1 outdoor box dwg# 15-1 engineering specifcations the contractor shall provide and install a potter SH-120 strobe/ horn. the unit shall operate on a nominal 120 vac input and have a selectable horn setting. the unit shall be listed to ul standard 1638, general signaling for indoor and outdoor applications. the strobe shall have a 110 candela rating. the unit shall include a weather proof back box as part of the standard package. the device shall have a universal pre-wire mounting plate for the ease of connection. the universal back plate shall allow for connection to a single gang, double gang, 4 square standard or deep box, bbk-1 weather proof bell back box or the bbx-5 custom weather proof back box. the horn shall be listed to ul standard 464, audible signaling devices.
mkt. #8910015 - rev b 7/10 page 2 of 2 printed in usa SH-120 series wall mount weather proof select-a-strobe/horn ? specifcations dimensions: inches (mm) optional bbx-5 outdoor back bo x 3.374 (85.7) front v iew 6.208 (157.7) bottom v iew 0.905 (23) 2 (50.8) back v iew 5.5 (139.7) dwg# 891-1 6.515 (165.5) 3.374 (85.7) 6 5/64 (154.4) 2 5/16 (59) 5 (127) back v iew 3.374 (85.7) 3.374 (85.7) dwg# 891-2 high voltage may be present inside the light assembly even though power is not connected. if access to the component board is required (removal or replacement), the capacitor must be discarged by touching a wire to both ends of the fashtube. do not attempt to touch or move the assembly until the capacitor has been discharged. includes 4 ea. #8-32 x ? screws series rated voltage max rms operating current (marms) light output flash rate operating voltage range operating temperature range construction type materials SH-120 120 vac 60hz n/a (current varies with horn setting) 110 cd on axis 72 per min. 96-132 vac -40f to 151f (-40c to 66c) indoor/ outdoor abs housing, polycarbonate lens series pattern tone switch setting on: 1 off: 0 max. rms operatingcurrent (marms) dba reverberant ratings per ul 464 (dba @ 10ft) sw1 sw2 sw3 SH-120 steady 2400hz 1 1 1 115 87.7 electro mechanical 1 0 1 119 87.8 broadband 0 1 1 115 88.2 temporal 2400hz 1 1 0 111 81.1 electro mechanical 1 0 0 112 83.4 broadband 0 1 0 110 83.4 dwg# 16-2 control panel ac+ ac- sl-120 to next appliance power wiring diagram
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: amseco: ? SH-120r
|
